8.
Mount the cradle to the false floor using four
(4) M4 x 8 screws.
Note:
The cradle release buttons should face
the front of the console along the Tele Aid
buttons (Figure 9).
9.
Mount the coil cord to the Tele Aid button side
of the cradle by securing the strain relief closest
to the main coil to the cradle with a #8 x ½
ʺ
Phillips sheet metal screw(Figure 9).
10.
Route the coil cord through the hole in the back
of the false floor and connect the Tele Aid
button connector.
Figure 9
P82.70-2921-01
11.
Reinstall the false floor assembly into the top
console compartment and secure it with the
four (4) previously removed screws.
12.
Attach the battery, connect the coil cord, and
install the telephone into the cradle (Figure 10).
13.
Carefully cut the two wire ties securing the Tele
Aid button cable to the floor of the
compartment.
Figure 10
P82.70-2922-01
14.
Connect the telephone coil cord RJ-45
connector and antenna coupling to the jacks in
the floor of the console (Figure 11).
15.
Apply a slight downward pressure on the
telephone and Tele Aid coil cords and secure
them to the front and rear tie-down-points with
a new wire tie (Figure 11).
© 2005 Mercedes-Benz USA, LLC
