16.
Place the non-foam-covered carpet piece
referred to in step 3, on the floor of the console
covering the cables. Route the cables through
the hole in the rear of the carpet piece (Figure
12).
Figure 12
P82.70-2924-01
17.
Fasten the telephone cable channel to the pre-
punched hole in the floor with a #8 x
⅜
ʺ
sheet
metal screw (Figure 13).
Figure 13
P82.70-2925-01
18.
Install the foam covered carpet piece onto the
floor of the compartment covering the channel
mounting screw (Figure 14).
© 2005 Mercedes-Benz USA, LLC
