X
Insert the ball coupling horizontally into ball
coupling recess
;
in the direction of the
arrow until the holes in ball coupling
=
are
in line with the holes in ball coupling
recess
?
.
X
Slide bolt
A
into the hole in the ball cou-
pling recess and the ball coupling to the
stop.
X
Secure the bolt using spring cotter
B
.
X
Check the ball coupling, bolt and spring
cotter for correct installation.
If the ball coupling cannot be correctly moun-
ted, remove the ball coupling. Under these
circumstances, the ball coupling must not be
used for trailer towing.
If the ball coupling cannot be locked and the
key cannot be removed, remove the ball cou-
pling and clean it. If the ball coupling can still
not be installed (locked) after it has been
cleaned, remove the ball coupling. The trailer
tow hitch must then not be used to tow a
trailer, as safe operation cannot be guaran-
teed.
Have the entire trailer tow hitch checked at a
qualified specialist workshop.
Coupling up a trailer
!
Do not connect the trailer's brake system
(if featured) to the hydraulic brake system
of the towing vehicle, as the latter is equip-
ped with an anti-lock brake system. Doing
266
Towing a trailer
Drivi
ng
and
parking
Summary of Contents for 2016 GL
