Introduction
In addition to the printed Operator's Manual,
the vehicle document wallet also contains
further operating instructions, such as:
R
Digital Operator's Manual on CD
R
Maintenance Booklet
R
Equipment-dependent supplements
The printed Operator's Manual gives you a
fast, concise overview of your vehicle's most
important functions.
You can also access the Digital Operator's
Manual via COMAND. If you have further
questions that are not covered in the printed
Operator's Manual, please consult the Digital
Operator's Manual.
i
You will not incur any costs when calling
up the Digital Operator's Manual. It works
without connecting to the Internet.
In the following sections you will find further
information about:
R
how to install the Digital Operator's Manual
on your COMAND (
Y
page 21)
R
how to access and operate the Digital
Operator's Manual
R
the differing access options from the basic
menu
There are three options for accessing via the
basic menu of the Digital Operator's Manual:
R
Visual search
R
Keyword search
R
Contents
Installation
Check whether or not the Digital Operator's
Manual has already been installed. To do so,
call up the Digital Operator's Manual via
COMAND as follows:
X
Using the COMAND controller, select the
®
symbol from the menu bar in the
COMAND display and press
W
to confirm.
X
Choose the "Operator's Manual" selection
card and confirm with
W
.
There are two possibilities:
1. The Digital Operator's Manual is
installed. The basic menu for the Digital
Operator's Manual opens.
2. The Digital Operator's Manual is not
installed. The following message appears:
The Operator's Manual has not yet
The Operator's Manual has not yet
been installed. Please insert the
been installed. Please insert the
correct disc.
correct disc.
If the Digital Operator's Manual has not yet
been installed, you have the option of
installing it yourself. You will find the
installation CD required in the vehicle
document wallet.
The duration of the installation process may
vary.
The installation process takes approximately
five minutes. This timespan only applies if you
install the Digital Operator's Manual while the
vehicle is at a standstill and no other
COMAND functions are in use at the time. The
duration of the installation process may
increase accordingly if other COMAND
functions such as navigation or telephony are
in use at the time.
If you encounter any problems during
installation, please contact your authorized
Mercedes-Benz Center.
X
To install the Digital Operator's
Manual: stop the vehicle safely, paying
attention to road and traffic conditions.
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Switch on COMAND.
X
Insert the installation CD into the CD/DVD
drive.
X
Follow the installation steps on the
COMAND display.
i
If the check was not successful, a
message appears, e.g.
The Operator's
The Operator's
Digital Operator's Manual
21
