X
Turn the SmartKey to position
1 or 2 in the
ignition lock.
X
Press or pull the
2
switch in the
corresponding direction.
i
If you press the
2
switch beyond the
point of resistance, an automatic opening/
closing process is started in the
corresponding direction. You can stop
automatic operation by operating the
switch again.
Resetting the panorama roof with
power tilt/sliding panel and the roller
sunblinds
!
If the panorama roof with power tilt/
sliding panel and the roller sunblind cannot
be fully opened or closed after resetting,
contact a qualified specialist workshop.
Reset the panorama roof with power tilt/
sliding panel and the roller sunblinds if the
panorama roof with power tilt/sliding panel
or the roller sunblinds do not move smoothly.
X
Turn the SmartKey to position
1 or 2 in the
ignition lock.
X
Pull the
2
switch repeatedly to the point
of resistance in the direction of arrow
=
until the panorama roof with power tilt/
sliding panel is fully closed.
X
Keep the
2
switch pulled for an
additional second.
X
Pull the
2
switch repeatedly to the point
of resistance in the direction of arrow
=
until the roller sunblinds are fully closed.
X
Keep the
2
switch pulled for an
additional second.
X
Make sure that the panorama roof with
power tilt/sliding panel (
fully opened again.
X
If this is not the case, repeat the steps
above again.
Sliding sunroof
101
Opening/closing
Z
Summary of Contents for 2013 GL X166
