X
To remove: press release button
=
on
respective bracket
A
and remove luggage
holder
;
by pulling upwards and out.
The telescopic rod can be used to secure the
load against the rear seats to prevent it from
moving around.
X
To install: insert one bracket
;
into both
the left and the right loading rails and slide
it to the desired position (
X
Insert telescopic rod
:
into brackets
;
and, while doing so, press release
button
?
and push the rod downwards
until it engages.
X
Ensure that locking button
=
on
brackets
;
is pressed.
This keeps brackets
;
in place on the
loading rail.
X
To remove: press release button
?
on
respective bracket
;
and remove
telescopic rod
:
by pulling it upwards and
out.
Stowage space under the trunk floor
The TIREFIT kit, the vehicle tool kit, etc. are
located in the stowage compartment.
X
To open: pull handle
:
upwards.
X
Hook handle
:
into rain trough
;
.
!
Unhook the handle before again before
closing the trunk lid and clip it in securely
to prevent the handle flap from protruding.
Otherwise, you could damage the handle.
EASY-PACK folding floor with stowage
space under the cargo compartment
floor (Wagon)
Do not carry unsecured objects under the
EASY-PACK folding luggage-compartment
floor if it is open.
Otherwise, you and other vehicle occupants
could be injured by objects being thrown
around the vehicle in the event of sharp
braking, a sudden change in direction or an
accident.
Stowage areas
285
Loading, stowing and features
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 285
Z
