Mercedes-Benz 2010 C 250, Operator'S Manual

Page: 236 / 364

tire blowout caused by a foreign object). In
this case bring the vehicle to a halt by carefully
applying the brakes and avoiding abrupt
steering maneuvers.
Restarting the tire pressure loss warning
system
The tire pressure loss warning system must
be restarted in the following situations:
R
after you have changed the tire inflation
pressure
R
after you have replaced the wheels or tires
R
after you have installed new wheels or tires
X
Using the Tire and Loading Information
placard on the driver’s door B-pillar or, if
available, the tire inflation pressure label on
the inside of the fuel filler flap, make sure
the tire inflation pressure of all four tires is
correct.
G
Warning!
The tire pressure loss warning system can
only warn you in a reliable manner if you have
set the correct tire inflation pressures for
each tire.
If an incorrect tire inflation pressure was set,
the system will monitor the pressure
according to the incorrect value.
X
Switch on the ignition.
X
Press button
=
or
;
on the
multifunction steering wheel to select the
Service
menu (
Y
page 129).
X
Press button
9
or
:
on the
multifunction steering wheel to select
Tire Pressure
.
X
Press button
a
on the multifunction
steering wheel to confirm.
The following message appears in the
multifunction display:
Run Flat Indicator
Active
Press 'OK' to Restart
X
Press button
a
.
The following message will appear in the
multifunction display:
Tire Pressure
Now OK?
Cancel
Yes
X
If you wish to confirm: Press button
9
or
:
to select
Yes
.
X
Press button
a
.
The following message will appear in the
multifunction display:
Run Flat
Indicator
Restarted
After a certain “learning phase”, the tire
pressure loss warning system checks the
set pressure values for all four tires.
X
If you wish to cancel: Press button
9
or
:
to select Cancel .
X
Press button
a
to confirm.
The previous settings remain unchanged.
Advanced Tire Pressure Monitoring
System (Advanced TPMS), (USA only)
Your vehicle is equipped with the Advanced
Tire Pressure Monitoring System (Advanced
TPMS). It measures the tire inflation pressure
in the vehicle’s tires and issues warnings in
case of pressure loss in one or more of the
tires.
The TPMS is equipped with a combination low
tire pressure/TPMS malfunction telltale in
the instrument cluster. Depending on how the
telltale illuminates, it indicates a low tire
pressure condition or a malfunction in the
TPMS system itself:
R
If the telltale illuminates continuously, one
or more of your tires is significantly
underinflated. There is no malfunction in
the TPMS.
R
If the telltale flashes for 60 seconds and
then stays illuminated, the TPMS system
itself is not operating properly.
234
Tires and wheels
Operation
204_AKB; 5; 23, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T17:54:06+02:00 - Seite 234