Mercedes-Benz 2010 C 250, Operator'S Manual

Page: 153 / 364

X
Entering frequency with keypad: Enter
desired frequency with buttons
k
to
x
on the keypad in audio control unit.
The audio system tunes in to the frequency
entered.
i It is not possible to enter a frequency in
the respective wave band which is outside
the frequency range.
X
Exiting menu without making an entry:
Press button
k
in the center console
(
Y
page 141).
Storing stations
You can store ten AM and ten FM stations in
the memory.
i If you select a memory preset which is
already in use, it will be overwritten by the
new station.
Storing stations manually with keypad
X
Tune in desired station.
The basic menu appears in the audio
display.
X
Press and hold desired station button
k
to
x
until a brief signal tone
sounds.
The station is stored.
Storing stations manually with station
memory menu
X
Tune in desired station.
The basic menu appears in the audio
display.
X
Press
W
when the main area is active.
or
X
Select Presets .
The station memory display appears in the
audio display.
The dot
#
in front of a memory position
indicates that the currently tuned station is
stored there.
X
Selecting a memory position: Slide
Z V Æ
or rotate
c V d
.
X
Storing a station to a selected memory
position: Press and hold
W
until a brief
signal tone sounds.
or
X
Press and hold desired station button
k
to
x
on keypad, until a brief signal
tone sounds.
The station is stored.
Autostore – automatic station memory
i This function is not available for Weather
Band/satellite radio. The autostore
function automatically assigns receivable
stations to the memory. The stations are
sorted according to reception quality at the
moment of performing the autostore. The
stations which were stored in the station
memory manually are overwritten in this
process. If less than ten stations are found,
the remaining entries are left empty.
Audio system
151
Controls in detail
204_AKB; 5; 23, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T17:54:06+02:00 - Seite 151
Z