Mercedes-Benz 2009 R-Class, Operator'S Manual

Page: 218 / 412

Loading and storing
216
X
Rolling out blind: Pull blind on handle
1
across the cargo compartment.
X
Guide blind into mounts
2
and release.
X
Rolling up blind: Disengage blind and
guide retraction by its handle
1
.
Removing and installing blind
Blind installed behind second-row seats
1
Release button
2
Blind
X
Removing: Roll up blind
2
.
X
Push release button
1
.
X
Pull blind
2
to the left until it engages.
X
Installing: For installation behind second
row seats, install the blind extensions
(
Y
page 217).
! For installation behind third-row seats,
the blind extensions must not be installed.
Otherwise, blind could be damaged.
X
Remove the mount covers in the side trims
of the third seat row when installing roller
blind
2
behind the second-row seats.
Mount cover behind second-row seats
X
Press on cover at its lower edge as
indicated by arrow.
The cover’s upper edge flips up.
X
Remove cover by pulling its upper edge out
of side trim in direction of arrow.
i To avoid loss of the covers, keep them in
a safe place while not in use, e.g. the glove
box.
X
Make sure release button
1
faces up and
the roller blind handle (
Y
page 215) is to
the rear before inserting the roller blind.
X
Place left side of blind
2
in left mount.
X
Position right side of blind
2
over right
mount.
X
Press release button
1
and guide blind
2
into mount.
X Make sure the cargo compartment cover
blind is securely fastened.
Controls in detail