Mercedes-Benz 2009 C 230, Operator'S Manual

Page: 358 / 404

Replacing bulbs
356
Lamp Type
3
Halogen headlamp:
Low beam H7 (55 W)
Bi-Xenon
headlamp: Low and
high beam
18
D1S-35 W
4
Halogen headlamp:
High beam/high-
beam flasher H7 (55 W)
Bi-Xenon
headlamp: High-
beam flasher H7 (55 W)
5
Front fog lamp H11 (55 W)
Corner-illuminating
front fog lamp H11 (55 W)
6
Side marker lamp W 5 W
7
Parking and
standing lamp 2 x W 5 W-BV
Rear lamps
Lamp Type
8
High-mounted
brake lamp LED
9
Side marker lamp W 5 W
a
Turn signal lamp PY 21 W
b
Brake lamp, parking
and standing lamp,
tail lamp 2 x P 21 W
c
Backup lamp P 21 W
d
License plate lamps W 5 W
e
Rear fog lamp
(driver’s side only) P 21 W
Notes on bulb replacement
R
Only use 12-volt bulbs of the same type and
with the specified watt rating.
R
Switch the lights off before changing a bulb
to prevent short circuits.
R
Always use a clean lint-free cloth when
handling bulbs.
R
Your hands should be dry and free of oil and
grease.
R
If the newly installed bulb does not come
on, contact an authorized Mercedes-Benz
Center.
i Mercedes-Benz recommends using
Longlife (LL) bulbs.
Have the LEDs and bulbs for the following
lamps replaced at an authorized Mercedes-
Benz Center:
R
Additional turn signal lamps in the exterior
rear view mirrors
R
Bi-Xenon lamps
R
Front fog lamps
R
Front side marker lamps
R
High-beam bulbs in the halogen-type and
Bi-Xenon front lamps
R
License plate lamps
R
Front parking and standing lamps
R
High-mounted brake lamp
! Do not replace the LEDs yourself. You
could otherwise damage the LEDs or parts
18
Vehicles with Bi-Xenon headlamps: Low beam and high beam use the same D1S-35 W lamp. Do not replace the Bi-Xenon bulbs yourself. Contact an authorized
Mercedes-Benz Center.
Practical hints