Mercedes-Benz 2009 C 230, Operator'S Manual

Page: 114 / 404

Power windows
112
If potential danger exists, proceed as
follows:
R
Release button
j
to stop the closing
procedure. To open, press and hold
button
k
. To continue the closing
procedure after making sure that there is
no danger of anyone being harmed by the
closing procedure, press and hold button
j
.
Vehicles with KEYLESS-GO:
R
Release the sensor surface on the
outside door handle to stop the closing
procedure.
R
Immediately pull on the same outside
door handle and hold firmly. The door
windows and the tilt/sliding sunroof or
panorama roof will open for as long as the
door handle is held but the door not
opened.
With SmartKey
The SmartKey must be in close proximity to
the driver’s outside door handle.
X
Aim transmitter eye of the SmartKey at the
driver’s outside door handle.
X
Press and hold button
j
on the
SmartKey until the door windows and the
tilt/sliding sunroof or panorama roof are
completely closed.
X
Release button
j
on the SmartKey to
interrupt the closing procedure.
X
Vehicles with panorama roof: Press and
hold button
j
on the SmartKey once
more.
The roller sunblinds extend.
X
Release button
j
on the SmartKey to
interrupt the extending procedure.
With KEYLESS-GO
The KEYLESS-GO feature is available on
Canada vehicles only.
The SmartKey with KEYLESS-GO must be
located outside the vehicle within
approximately 3 ft (1 m) of a door.
X Close all doors.
X
Touch and hold the sensor surface on an
outside door handle (
Y
page 77) until the
door windows and the tilt/sliding sunroof
or panorama roof are completely closed.
i Make sure you are only touching the
sensor surface.
X
Release the sensor surface to interrupt the
closing procedure.
X
Vehicles with panorama roof: Touch and
hold the sensor surface once more.
The roller sunblinds extend.
X Release the sensor surface to interrupt the
extending procedure.
Controls in detail