Mercedes-Benz 2007 CLK 350, Operator'S Manual

Page: 433 / 505

432
Practical hints
Replacing bulbs
왘
Reinsert bulb holder
4
with the bulb in
the lamp and turn clockwise.
왘
Align housing cover
2
and turn it
clockwise.
Front turn signal lamp bulb
왘
Turn bulb socket
1
counterclockwise
and remove it.
왘
Press gently onto the bulb and turn
counterclockwise out of bulb
socket
1
.
왘
Press the new bulb gently into bulb
socket
1
and turn clockwise until it
engages.
왘
Place bulb socket
1
back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
왘
Turn housing cover
2
counterclock-
wise and remove it.
왘
Pull out bulb socket
5
with the bulb.
왘
Pull the bulb out of the bulb socket
5
.
왘
Press the new bulb into bulb socket
5
.
왘
Press bulb socket
5
back into the
lamp.
왘
Align housing cover
2
and turn it
clockwise.
Additional turn signal lamps
The additional turn signal lamps in the ex-
terior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the additional turn signal unit
replaced by an authorized Mercedes-Benz
Center.
Front side marker lamp
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced by an authorized
Mercedes-Benz Center.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
왘
Turn the exterior lamp switch to
position
M
(
컄
page 126).
Tail lamp unit
왘
Open trunk lid.
왘
Swing the trim panel covering the cor-
responding rear lights to the side.
1
Connector
2
Tab
왘
Disconnect electrical connector
1
.
컄컄