Mercedes-Benz 2007 CLK 350, Operator'S Manual

Page: 406 / 505

405
Practical hints
Where will I find...?
Removing the vehicle tool kit
왘
Lift up trunk floor cover and engage
trunk floor handle in upper edge of
trunk.
1
Retaining screw
2
Storage well casing
왘
Loosen retaining screw
1
in the mid-
dle of storage well casing
2
by turning
it counterclockwise.
왘
Remove storage well casing
2
.
3
Arrow
4
Minispare wheel
5
Vehicle tool kit storage well casing
6
Vehicle tool kit
왘
Remove vehicle tool kit
6
.
Storing the vehicle tool kit
왘
Place vehicle tool kit
6
in vehicle tool
kit storage well casing
5
.
왘
Place storage well casing
2
over the
vehicle tool kit storage well casing
5
and turn retaining screw
1
clockwise
as far it will go to secure the Minispare
wheel.
왘
Disengage trunk floor handle in upper
edge of trunk and lower trunk floor cov-
er.
i
Hex wrench:
You will find the hex wrench for manually operat-
ing the roll bars (
컄
page 413) or the soft top
(
컄
page 415) at the lower edge of the storage
well casing.
i
Arrow
3
on vehicle tool kit storage well
casing
5
must point in the direction of travel.
Otherwise you cannot place the storage well
casing
2
on top and secure the Minispare
wheel with retaining screw
1
.
!
To prevent damage, always disengage trunk
floor handle from upper edge of trunk and lower
trunk floor before closing the trunk.