Mercedes-Benz 2007 CLK 350, Operator'S Manual

Page: 409 / 505

408
Practical hints
Where will I find...?
1
Vehicle tool kit
Wheel wrench
Jack
2
Arrow
3
Minispare wheel, Wheel bolts for
Minispare wheel
4
Vehicle tool kit storage well casing
왘
Remove vehicle tool kit storage well
casing
4
.
왘
Remove Minispare wheel
3
.
Storing the Minispare wheel
왘
Place Minispare wheel
3
in wheel
well.
왘
Place vehicle tool kit storage well
casing
4
over the Minispare wheel.
Make sure arrow
2
on vehicle tool kit
storage well casing
4
points in the
direction of travel.
왘
Place storage well casing (
컄
page 405)
over the vehicle tool kit storage well
casing
4
and turn the retaining screw
(
컄
page 405) clockwise as far it will go
to secure the Minispare wheel.
왘
Disengage trunk floor handle in upper
edge of trunk and lower trunk floor cov-
er.
i
Arrow
2
on vehicle tool kit storage well
casing
4
must point in the direction of travel.
Otherwise you cannot place the storage well cas-
ing (
컄
page 405) on top and secure the Minis-
pare wheel with the retaining screw
(
컄
page 405).
!
To prevent damage, always disengage trunk
floor handle from upper edge of trunk and lower
trunk floor before closing the trunk.
Warning!
G
The dimensions of the Minispare wheel are
different from those of the road wheels. As
a result, the vehicle handling characteristics
change when driving with a Minispare wheel
mounted.
The Minispare wheel should only be used
temporarily, and should be replaced with a
regular road wheel as quickly as possible.
Do not switch off the ESP
®
when a Minis-
pare wheel is mounted.
컄컄