Mercedes-Benz 2004 C-Class Wagon, Operator'S Manual

Page: 53 / 400

53
Getting started
Parking and locking
Turning off engine
왘
Place the gear selector lever in
position
P .
왘
Turn the SmartKey in the starter switch
to position
0 and remove it.
The immobilizer is activated.
왘
Press the seat belt release button
(
컄
page 41).
Allow the retractor to completely
rewind the seat belt by guiding the
latch plate.
왘
After exiting the vehicle, press the lock
button
‹
on the SmartKey
(
컄
page 30).
All turn signal lamps flash three times.
The locking knobs in the doors move
down.
For more information, see “Locking and
unlocking” (
컄
page 84).
i
Always set the parking brake in
addition to shifting to position
P .
On steep slopes, turn the front wheels
towards the road curb.
i
The SmartKey can only be removed
from the starter switch with the gear
selector lever in position
P .
!
With the SmartKey removed and the
driver’s door open, a warning sounds if
the vehicle’s exterior lamps are not
switched off.
Warning!
G
To prevent possible personal injury, always
keep hands and fingers away from the door
openings when closing the doors. Be espe-
cially careful when small children are
around.
Before closing doors, make sure there is no
possibility of someone getting caught in a
door during closing.
Warning!
G
When leaving the vehicle, always remove the
SmartKey from the starter switch, and lock
your vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. Unsupervised use of vehi-
cle equipment may cause an accident
and/or serious personal injury.