Mercedes-Benz 2004 C-Class Wagon, Operator'S Manual

Page: 128 / 400

128
Controls in detail
Control system
With daytime running lamp mode
selected and the exterior lamp switch
at position
0 , the following lamps will
come on automatically when the
engine is turned on:
앫
Parking lamps and low beam
headlamps
앫
License plate lamps (in low ambient
light conditions)
Setting locator lighting
During darkness, the following lamps will
come on when the exterior lamp switch is
in position
U
, the locator lighting
feature is activated, and the vehicle is
unlocked by SmartKey:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Front fog lamps
To activate locator lighting:
왘
Make sure the function
LOCATOR
LIGHTING
is set.
왘
Turn the exterior lamp switch to
position
U
.
The locator lighting switches off when the
driver’s door is opened. It switches off
automatically after a period of approxi-
mately 40 seconds.
왘
Move the selection marker with
the
æ
or
ç
button to the
LIGHTING submenu.
왘
Press button
j
or
k
repeatedly
until you see this message in the
display:
LOCATOR LIGHTING
.
The selection marker is on the current
setting.
왘 Press
æ
or
ç
to select the
desired setting.
The locator lighting will be switched on
or off.
i
If you turn the exterior lamp switch to
another position, the corresponding
lamp(s) will switch on.
For safety reasons, resetting the
LIGHTING submenu to factory settings
(
컄
page 122) while driving will not
reset the daytime running lamp mode.
In the display you will then see the
message:
LIGHTING – CANNOT BE
TOTALLY RESET TO FACTORY SETTINGS
WHILE DRIVING!
.
컄컄