Mercedes-Benz 2003 C-Class Coupe Operator'S Manual Download Page 171

Page: 171 / 356

171

Controls in detail

Audio system

Skipping blank sections (skip blank)

Switching on the skip blank function

왘

Press the

key.

appears on the display in in-

versed-color format.

If the system does not detect a sound
signal, the cassette will automatically
fast forward to the next sound signal.

Switching off the skip blank function

왘

Press the

key.

The inversed-color

display disap-

pears.

Dolby NR

(noise reduction system)

To enable optimum sound reproduction of
cassettes recorded using Dolby B NR

, the

Dolby NR

system should be switched on.

Switching on

왘

Press the

key.

appears on the display in in-

versed-color format.

Switching off

왘

Press the

key again.

The inversed-color

display disa-

pears.

DOLBY and the double-D symbol

are trade-

marks of Dolby Laboratories Licensing Corpora-
tion.
The Dolby noise reduction system is manufactured
under license from Dolby Laboratories Licensing
Corporation.

The Dolby NR

function should be

switched off when playing cassettes
not recorded with Dolby B NR

Summary of Contents for 2003 C-Class Coupe





































































































































































































































































































































































Search results

Summary of Contents for 2003 C-Class Coupe

Reviews:

Related manuals for 2003 C-Class Coupe

Brands by name

Popular brands

Mercedes-Benz 2003 C-Class Coupe, Operator'S Manual

Search results

Summary of Contents for 2003 C-Class Coupe

Reviews:

Related manuals for 2003 C-Class Coupe

Brands by name

Popular brands