Mercedes-Benz 2003 C-Class Coupe Operator'S Manual Download Page 262

Page: 262 / 356

262

Practical hints

What to do if …

Display

Possible cause

Suggested solution

ENGINE OIL LEVEL
STOP, ENGINE OFF!

There is no oil in the engine. There is a dan-
ger of engine damage.

왘

Carefully bring the vehicle to a halt as
soon as possible.

왘

Turn off the engine.

왘

Add engine oil.

ENGINE OIL LEVEL
CHECK LEVEL!

The engine oil level is too low.

왘

Check the engine oil level
(

컄

page 227) and add oil as required.

ENGINE OIL LEVEL
REDUCE OIL LEVEL!

You have added too much engine oil. There
is a risk of damaging the engine or the cat-
alytic converter.

왘

Have oil siphoned. Observe all legal
requirements with respect to its dis-
posal.

ENGINE OIL
VISIT WORKSHOP!

The engine oil has dropped to a critical lev-
el.

왘

Check the engine oil level
(

컄

page 227) and add oil as required.

왘

If you must add engine oil frequently,
have the engine checked for possible
leaks.

There is water in the oil.

왘

Have the oil checked.

ENGINE OIL LEVEL
VISIT WORKSHOP!

The measuring system is malfunctioning.

왘

Have the measuring system checked
by an authorized Mercedes-Benz
Center.

Summary of Contents for 2003 C-Class Coupe





































































































































































































































































































































































Search results

Summary of Contents for 2003 C-Class Coupe

Reviews:

Related manuals for 2003 C-Class Coupe

Brands by name

Popular brands

Mercedes-Benz 2003 C-Class Coupe, Operator'S Manual

Search results

Summary of Contents for 2003 C-Class Coupe

Reviews:

Related manuals for 2003 C-Class Coupe

Brands by name

Popular brands