Mercedes-Benz 2002 C 230 Kompressor Operator'S Manual Download Page 350

Page: 350 / 399

347

Exterior lamps

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Bulbs for high and low beam

H7 (55 W)

Open hood.

Press the clamp and remove headlamp cover (1 or 2).

Pull electrical connector off.

Unclip the retainer spring and take out the bulb.

Insert the new bulb so that the base locates in the
recess on the holder.

Clip in retainer springs and plug the connector onto the
bulb.

Align headlamp cover (1 or 2) and click into place.

Turn signal lamp

1156 NA (26.9/5 W/32/4 cp)

Open hood.

Twist bulb socket (3) counterclockwise and pull out.
Push bulb into socket, turn counterclockwise and
remove.

Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket.

Parking and standing lamp

W 5W

Open hood.

Press the clamp and remove headlamp cover (2).

Pull out bulb socket (6). Remove bulb from socket.

Insert new bulb in socket and push in. Reinstall bulb
socket.

Align headlamp cover (2) and click into place.

Summary of Contents for 2002 C 230 Kompressor
















































































































































































































































































































































































































Search results

Summary of Contents for 2002 C 230 Kompressor

Reviews:

Related manuals for 2002 C 230 Kompressor

Brands by name

Popular brands

Mercedes-Benz 2002 C 230 Kompressor, Operator'S Manual

Search results

Summary of Contents for 2002 C 230 Kompressor

Reviews:

Related manuals for 2002 C 230 Kompressor

Brands by name

Popular brands