Mercedes-Benz 2002 C 230 Kompressor Operator'S Manual Download Page 64

Page: 64 / 399

Seats

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Head restraint height

Raising:

Pull up on head restraint.

If the head restraint is fully lowered, press button (2) to
pull up.

Lowering:

Push button (2) and push down on head restraint.

Adjust head restraint to support the back of the head
approximately at ear level. The head restraint
inclination can also be adjusted manually.

Important!

For safety reasons, always drive with the rear head
restraints in upright position when the rear seats are
occupied.

Keep the area around head restraints clear of articles
(e.g. clothing) to not obstruct the folding operation of
the head restraints.

Summary of Contents for 2002 C 230 Kompressor
















































































































































































































































































































































































































Search results

Summary of Contents for 2002 C 230 Kompressor

Reviews:

Related manuals for 2002 C 230 Kompressor

Brands by name

Popular brands

Mercedes-Benz 2002 C 230 Kompressor, Operator'S Manual

Search results

Summary of Contents for 2002 C 230 Kompressor

Reviews:

Related manuals for 2002 C 230 Kompressor

Brands by name

Popular brands