Mercedes-Benz 2001 C 240 Operator'S Manual Download

Page: 320 / 381

311

Tires, Wheels

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

5. Remove the two-piece wheel wrench from the

vehicle tool kit and assemble (see page 305).

6. Using the wrench, loosen but do not yet remove the

wheel bolts.

7. Place jack on firm ground. Position jack (1) under

the take-up bracket (2) so that it is always vertical
(plumb-line) as seen from the side, even if the
vehicle is parked on an incline.

The jack take-up brackets are located directly
behind the front wheel housings and in front of the
rear wheel housings.

8. Jack up the vehicle until the wheel is clear of the

ground. Never start engine while vehicle is raised.

P40.10-2283-26

Summary of Contents for 2001 C 240






























































































































































































































































































































































































Search results

Summary of Contents for 2001 C 240

Reviews:

Related manuals for 2001 C 240

Brands by name

Popular brands

Mercedes-Benz 2001 C 240, Operator'S Manual

Search results

Summary of Contents for 2001 C 240

Reviews:

Related manuals for 2001 C 240

Brands by name

Popular brands