background image

230

Starter switch

Technical

data

Instruments 
and controls

Operation

Driving

Instrument 

cluster display

Practical hints

Car care

Index

Starter switch

0

The electronic key can be withdrawn in this position 
only. The steering is locked when the electronic key 
is removed from the starter switch. If necessary, 
move steering wheel slightly to allow the locking 
mechanism to engage. 

In vehicles with automatic transmission, the 
electronic key can be removed only with the selector 
lever in position “P”. After removing the electronic 

key or with the electronic key in starter switch 
position 0, the selector lever is locked in 
position “P”.

1

Gear selector lever is unlocked.

Most electrical consumers can be operated. For 
detailed information see respective subjects.

2

Driving position.

3

Starting position.

See page 232 for instructions on starting and stopping 
the engine.

Warning!

When leaving the vehicle always remove the 
electronic key from the starter switch, and lock the 
vehicle. Do not leave children unattended in the 
vehicle, or with access to an unlocked vehicle. 
Unsupervised use of vehicle equipment may cause 
serious personal injury.

Summary of Contents for 2001 C 240






























































































































































































































































































































































































Reviews: