Mercedes-Benz 2001 C 240 Operator'S Manual Download Page 124

Page: 124 / 381

115

Multifunction steering wheel, multifunction display

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Press the

button repeatedly until the

individual setting preliminary display (1) appears.

Press the

button until the setting menu

“SETTINGS” (2) is displayed.

Press button

until the menu

“INSTRUMENT CLUSTER” is selected by the selection
marker.

Press the

button until the required

display (3 to 9) is displayed.

Pressing the

button sets the time in

setting menus (3, 4) and controls the selection marker
in the setting menus (5 to 9).

The settings made are stored and applied immediately.

The individual setting preliminary display (1) will
appear again after you have run through all the setting
menus. Pressing the

button displays the

next or previous system.

Summary of Contents for 2001 C 240






























































































































































































































































































































































































Search results

Summary of Contents for 2001 C 240

Reviews:

Brands by name

Popular brands

Mercedes-Benz 2001 C 240, Operator'S Manual

Search results

Summary of Contents for 2001 C 240

Reviews:

Brands by name

Popular brands