Replacing bulbs:
Bulb for turn signal, parking, side
marker and standing lamp
W/32/3 cp):
Turn bulb socket (6) with lamp
bulb to the left and pull out socket.
Push lamp bulb into socket and
turn to the left and pull out bulb.
Bulb for high and low beam
(Halogen type 9004):
Compress cover (4) at the top and
remove upwards. Turn clamping
ring (8) counterclockwise and
detach. Take out bulb and pull off
electrical connector (7).
Insert new bulb (flat side facing
up), mount clamping ring (8) (with
tab facing down) and turn clock-
wise. Push electrical connector on
securely.
Fog lamp bulb (Halogen type H 3):
Compress the retaining clip of the
cover (5) at the top while removing
it upwards, Pull off electrical con-
nector (10). Disengage retaining
clip and remove bulb (9). When
replacing cover
make sure it
clicks into place.
Assemblies
Side marker lamp
(10 W/6 cp bulb)
Turn signal lamp
(21 W/32 cp bulb)
Stop lamp (21 W/32 cp bulb)
Tail, parking and standing lamp
(10 W/6 cp bulb)
Backup lamp
(21 W/32 cp bulb)
Rear fog lamp
(21 W/32 cp bulb)
(driver’s side only)
Turn both bulb carrier locks in the
trunk all the way to the left and
remove bulb carrier. To replace a
bulb, push bulb in, turn to the left
and remove.
89
Summary of Contents for 190E 2.3 1993
Page 1: ... A A ______ __w c Mercedes Benz Owner s IManual 1993 ...
Page 11: ...11 ...
Page 119: ...Index ...
Page 124: ...NOTES 127 ...