Mercedes-Benz 190E 2.3 1993 Owner'S Manual Download Page 53

Page: 53 / 127

Sun Visors

Vanity mirror:

Interior Lamps

Swing sun visors down to protect

With the visor engaged in its inner

The switch for the front lamp

against sun glare.

mounting, the lamp can be

(combination interior and reading

If sunlight enters through the side

switched on by opening the cover.

lamp) has 4 positions.

window, disengage visor from

Interior and reading lamp

inner mounting and pivot to the

switched on continuously.

side.

2 Interior and reading lamp

switched off.

3 Reading lamp switched on

continuously.

4 Interior lamp is switched on,

and off delayed, by the front
door contact switches. How-
ever, there will be no delay
when the key is in steering lock

position 2.

Summary of Contents for 190E 2.3 1993
































































































































Search results

Summary of Contents for 190E 2.3 1993

Reviews:

Related manuals for 190E 2.3 1993

Brands by name

Popular brands

Mercedes-Benz 190E 2.3 1993, Owner'S Manual

Search results

Summary of Contents for 190E 2.3 1993

Reviews:

Related manuals for 190E 2.3 1993

Brands by name

Popular brands