Mercedes-Benz 190E 2.3 1993 Owner'S Manual Download Page 24

Page: 24 / 127

Examples of Air Flow Adjustments

Press to defrost or quickly defog windows.

Maximum heated air is directed to the windshield

and side windows, independent of the temperature
setting

mode control (3) and fan speed control

lever (4) position. The air volume through outlets (7)
may be adjusted with levers (8) as desired.

Press to defog the inside of the windshield.

is directed to the windshield in the heating or

cooling mode. Press button

of mode control (3)

and increase fan speed for a short period with
lever (4). Adjust levers (8) for the desired air flow
through outlets (7).

It is possible for condensation to form on the out-

side of the windshield in humid weather in this

mode. If this happens, change the air flow or de-

crease the fan speed.

Summary of Contents for 190E 2.3 1993
































































































































Search results

Summary of Contents for 190E 2.3 1993

Reviews:

Related manuals for 190E 2.3 1993

Brands by name

Popular brands

Mercedes-Benz 190E 2.3 1993, Owner'S Manual

Search results

Summary of Contents for 190E 2.3 1993

Reviews:

Related manuals for 190E 2.3 1993

Brands by name

Popular brands