Mercedes-Benz 190 E 2.3 Owner'S Manual Download Page 23

Page: 23 / 101

Examples of Air Flow Adjustm ents

|f§

Press to defrost or quickly defog windows.

Maximum heated air is directed to the windshield and side

windows, independent of the tem perature dial (1) setting,
climate control switch (3) and lever (4) position. The air
volume through outlets (8) may be adjusted with levers (9)
as desired.

ijH Press to defog the windshield from inside.

Air is directed to the windshield in the heating or cooling

mode. Press button

of climate control switch (3) and

increase fan speed for a short period with lever (4). Adjust
levers (9) for the desired air flow through outlets (8).

It is possible for condensation to form on outside of the

windshield in humid weather in this mode. If this happens,
change the air flow or decrease the fan speed.

Summary of Contents for 190 E 2.3






































































































Search results

Summary of Contents for 190 E 2.3

Reviews:

Related manuals for 190 E 2.3

Brands by name

Popular brands

Mercedes-Benz 190 E 2.3, Owner'S Manual

Search results

Summary of Contents for 190 E 2.3

Reviews:

Related manuals for 190 E 2.3

Brands by name

Popular brands