T-SI-82.70/131
n
May 2000
10
4. Place the contoured spacer (2) slanting
backwards onto the grommet (6) in the roof
(Figure 20).
5. Screw the hex-nut (3) up to the bolt collar (4)
and insert the bolt through the contoured
spacer (Figure 20).
6. Screw and hand-tighten the bolt into the
factory-installed base.
7. Tighten, making sure not to over-tighten, the
hex-nut (3) onto the contoured spacer
(Figure 20).
8. Place the top cap (5) over the whip and allow
the inner portion of the cap to fit into the
contoured spacer grove. Press firmly down
on the cap until it snaps into place (Figure
20).
Figure 20
P82.70-2277-01
H. Final assembly and function test
1. Reinstall the climate control module and MCS (radio) unit.
2. Program the telephone per S-SI-82.70/124,
StarTAC Portable Telephone Programming
.
3. Verify proper telephone operation per the following checklist:
G
Handset dialing is functioning
G
Head unit dialing is functioning
G
Handset incoming/outgoing call audio is clear
G
Hands-free incoming/outgoing call audio is clear
G
Automatic memory download is functioning (In order for this feature to operate, it may be
necessary to store a test number in the telephone handset; stored numbers should be available
for dialing from the head unit after automatic download.)
