22
ASSEMBLY PROCEDURES
Be sure to place the cooker on a flat surface, cardboard, cloth, or some other material to avoid
damaging or scratching the paint.
1. Lower the lower wall in the direction of the
arrow.
2. Lift the upper wall as shown in the reference
picture.
3. Open the wall on the left-hand side as indicated by the arrow. 4.Open the wall on the right-hand side as indicated by
the arrow.
5. The left and right (upper) sides must be connected using
the two wing screws. The left and right (lower) sides are
connected to the lower base using 4 M4 screws.
6. Remove the holder from the canister and mould it
into the correct shape before fitting it.
7. Install the carafe holder on the cooker.
8
.
Install the five castors on the lower cabinet.
by tightening them with the nuts and spanner provided.
SECURITY MEASURES
1. Use the cooker in accordance
with the user instructions
included with the product. Keep
these instructions in a safe
place.
insurance.
4. Do not move the cooker from
one room to another while it is
on.
2. Do not rest clothes or other
objects on the cooker, could
catch fire.
5. Do not place next to a wall,
curtains and other materials.
lammable. Always observe a
minimum distance to other
objects of 50 cm to the side and
100 cm to the front (page 6). The
front face must always face the
centre of the room. Use extreme
caution if the cooker is on castors,
as it could easily turn if hit by a
child or an animal.
3. Do not place the cooker near
armchairs, fabrics, bedding and
other furniture.
6. If gas is leaking, shut off the
regulator and turn off all gas supply
to the flames. Do not disconnect the
regulator. Call for emergency service.
Do not use the cooker again until it
has been inspected by a service
technician.