Orient the Right Pedal (33) as shown, and
attach it to the Right Pedal Arm (15) with two
M10 x 45mm Bolts (76), two M10 Washers (72),
and two M10 Locknuts (83); start both Bolts,
and then tighten the Locknuts.
Attach the Left Pedal (32) to the Left Pedal
Arm (14) in the same way.
Tip: A
void pinching the wire. Attach the
Handlebar (6) to the Upright (2) with two
M8 x 16mm Screws (74), two M8 Split Washers
(90), and two M8 Curved Washers (65); start
both Screws, and then tighten them.
1:1
Page12
ASSEMBLY INSTRUCTION
10
9
10
11
11
2
6
74
90
65
Make sure that all parts of the elliptical are properly tightened.
While a second person holds the Console (5)
near the Upright (2), connect the wire (C) on
the Console to the Upright Wire (49). Insert the
excess wire into the Upright.
Tip: A
void pinching the wires. Attach
the Console (5) to the Upright (2) with two
M5 x 12mm Screws (80); start both Screws,
and then tighten them.
Then, plug the Pulse Wire (81) into the
receptacle on the back of the Console (5).
5
2
81
80
C
49
9
72
83
83
72
76
76
33
15
32
14
Summary of Contents for MR-532
