Meopta Artemis 2000 1,5-6x42 Page 11 Brochure Download

Page: 11 / 13

Digiscoping

TGA 75

Meopta DP1 30x

High quality digiscoping has never been as easy and affordable as it is with the
new Meopta DP1 30x eyepiece. The Meopta DP1 30x eyepiece enables you to
capture an image while still observing the image through the eyepiece. You do not
have to interrupt your observation to take a picture, nor do you need to invest in
an expensive device that merges those two functionalities. All you need is your
favorite digital camera, ﬁ tted to the Meopta DP1 30x eyepiece by means of the
camera’s tripod thread. Then, simply
observe and capture images as you
desire.

•

Meopta DP1 30x eyepiece ﬁ ts most

  compact digital cameras with an optical
  zoom span of up to 6x. The Meopta DP1 30x does not
  work with SLR and DSLR cameras.

•

In many instances, pictures will be bordered by a black

frame with rounded corners. This is normal, but can be
edited using any photo editing software, if so desired.

•

For best results, it is important to minimize vibrations in your

digiscoping set-up. A solid tripod is a must, while a remote
shutter release offers a signiﬁ cant advantage.

Digiscoping with DSLR cameras

•

The Meopta Photoadapter is designed for digiscoping with single lens reﬂ ex (SLR) cameras.

The Photoadapter transforms your Meostar spotting scope into an 800mm telephoto lens.

•

A T-ring is used to connect the standardized thread of the Photoadapter to your camera’s body.

T-rings are brand speciﬁ c and can be purchased for your brand of camera at any good camera shop.

•

Compatible with most SLR and DSLR cameras

This product was
developed with the
support of the
Ministry of Trade
and Industry of the
Czech Republic

The design of our

TGA 75

draw tube spotting scope offers superior light transmission, edge to edge image

resolution and clarity, stemming from our fully multi coated lenses and prisms. The draw tube design allows for
quick set up, using an 1/4“ or 3/4“ tripod mount, or simply a rock or tree for support. The TGA 75 has a secure grip
and provides smooth and precise focusing. This collapsible (9.5 inches) and easy to carry light weight (40.6 ounce)
scope is ideal for use in the ﬁ eld and especially on the move! The noise and shock dampening rubber armor makes
this water and dust resistant scope extremely rugged and a must for any serious
backpacker or hunter. The eyepieces for Meopta TGA 75 and Meostar S1 75
are mutually interchangeable except for the 30x WA-R
ranging eyepiece, which can only be used with the
TGA 75.

Meopta H75 30x WA-R

The Meopta H75 30x WA-R is a ﬁ xed power wide-angle eyepiece, which has
been designed for the TGA 75. What makes this eyepiece unique is that it has
been ﬁ tted with a ranging reticle (cross) enabling the user to estimate the
distance of the object being observed. Use of the ranging reticle to estimate
distance:
The dash lines placed from top to bottom on thin lines subtend the angle of 1
m at 1000 m, i.e. 1 milliradian. In military terminology this angle is called 1 mil.
The distance D can be determined by a simple calculation using the formula D
= 1000 x H / h, where H stands for the actual target height in meter and h
stands for its angular height in scale divisions. For precise range ﬁ nding it is
necessary for the user to know the exact or estimated target height. For
example, the estimated height of an adult Roebuck body trunk is 0.5 m and
with angular height in the reticle screen as seen in the illustration below the
distance is calculated as follows: D = 1000 x 0,5 /h = 125 m.

Magniﬁ cation

Eye relief (mm)

Dioptric range of eyepiece (dpt)

Field of view

Dimensions (mm)

Weight (g)

visual

photographical

30x

16x

±4

2°8’ (37m/131mm)