EN
43
Using the dust cloth
NOTE:
Remove the dust cloth plate from the robotic vacuum cleaner when the dust cloth is not going to
be used.
1.
Loosen the dust cloth plate by placing a finger under the dust cloth plate , press to the left
and lift.
2.
Place the dust cloth flat on a clean surface.
3.
Place the dust cloth plate with the smooth side towards the dust cloth.
4.
Fold one edge of the dust cloth over the edge of the plate and press the cloth into the slot.
5.
Stretch the cloth, and fold over the other edge and press into the slot in the same way.
6.
Position the plate with dust cloth on the underside of the vacuum cleaner and press into the
mount close to the rear wheels. Repeat on the other side.
7.
Refit the dust cloth plate.
