EN
42
Charging the battery
NOTE:
• The power switch must be in switched off position during charging; otherwise, the battery lamp
remains red to indicate that the robotic vacuum cleaner needs to be switched off.
• If the power switch is not switched off during charging the robotic vacuum cleaner must be
turned off and restarted with the power switch when charging is complete.
1.
Check before charging the battery that the battery is inserted properly and the power switch
has been turned off.
2.
Connect the mains adapter to the robotic vacuum cleaner’s DC connection and then plug the
adapter into a power outlet. The battery lamp flashes blue.
– When the battery is fully charged, the battery lamp lights blue.
– When the battery is discharged, the battery lamp lights red.
3.
Always charge the battery for 4 hours continuously for the best battery life.
– In the event of a power failure during charging, the elapsed charging time restarts and it
takes 4 hours before the battery lamp lights blue. However, the robotic vacuum cleaner
can be used after a total of 4 hours charging time.
Fitting the side brushes
1.
Place the brush marked L on the bracket marked L and the brush marked R on the bracket
marked R and press into place.
2.
Loosen the brushes by pulling upwards.
