EN
16
• Never attempt to lift or move
the pot when it is full of hot
water.
• Do not allow the power cord
to hang over the edge of a
table or worktop, or to come
into contact with hot surfaces.
• Make sure the pot is full of
water before switching on
the product.
• Do not immerse the product,
the power cord or plug, in
water or any other liquid –
risk of fire, electric shock
and/or personal injury.
• Do not overfill the pot – risk
of boiling water splashing
out between the lid and the
edge of the pot.
• Do not use accessories other
than those recommended or
sold by the manufacturer.
The use of other accessories
can result in fire, electric
shock and/or personal injury.
• Do not use the product unless
the lid is properly closed.
• If the power cord or plug are
damaged they must be re-
placed by an authorised
SAFETY INSTRUCTIONS
• Place the product on a level,
stable surface that can
support the weight of the
product filled with water. The
product should be placed at a
safe distance from the edge
of a worktop or table top to
prevent the product tipping
over and the risk of scalding.
• Do not place the product
near a gas or electric heater,
or near other sources of heat
or hot surfaces.
• Do not use the product
outdoors.
• Do not use the product if it
has been dropped on the
floor, or damaged in any
other way. Return a dam-
aged product to an author-
ised service representative to
be checked and/or repaired.
• Do not pull the power cord to
pull out the plug.
• Switch off the product and
pull out the plug from the
power point before cleaning
and when the product is not
in use.
Summary of Contents for 008378
Page 3: ...1 1 2 3 4 9 8 7 6 5 10 11 ...