EN
17
actual material. An incorrect
temperature setting can
damage the material. For
materials of unknown
sensitivity to temperature,
start with the lowest
temperature setting.
Electrical safety.
• Check that the mains voltage
corresponds to the rated
voltage on the type plate.
• Any repairs should be carried
out by an authorised service
centre or other qualified
personnel.
• A damaged cord or plug
must be replaced by an
authorised service centre or
qualified person to ensure
safe use.
• Do not pull the power cord to
unplug the plug.
• Keep the power cord away
from heat, oil, sharp edges
and moving parts. Avoid
bending, clenching,
dragging or driving over the
power cord. Route the power
cord so that there is no risk
of tripping over it.
• Pull out the plug before re-
filling or cleaning, and when
the appliance is not in use.
• Always fully unwind the
power cord before starting
the appliance. Do not use an
extension cord.
• Do not touch the power cord
or the plug with wet hands
or wet parts of your body.
• Do not immerse the
appliance in water or any
other liquid, and make sure
no water gets into the
casing. Do not expose the
appliance to moisture and
do not use it outdoors.. Pull
out the plug immediately if
water gets into the casing.
Have the appliance checked
and if necessary repaired by
an authorised service centre
before using it again.
• Do not use the appliance near
a bathtub, shower or sink etc.
that contains water or any
other liquid, or on wet surfaces
– risk of electric shock.
• Never open the casing on
Summary of Contents for 003-416
Page 3: ...1 1 2 3 4 2 3 ...
