background image

85-03-00890                        7 | P a g e  

 

 

CONGRATULATIONS 

You are the owner of a world-class heat producing gas direct vent sealed combustion fireplace. 

This elegant, highly efficient Fireplace will be a constant source of comfort and fascination.  It will be the focal point of 
beauty and interest in your home. 

The Mendota Gas Fireplace is a true heating appliance incorporating the traditional aesthetics of fireplace fire viewing with 
the controllability and fuel efficiency of a home gas furnace. Of particular interest is the low fuel consumption and brilliant 
fire viewing afforded by the realistic Premium Fiber wood fire-like combustion system. 

Carefully read the following instructions prior to actual installation.  Proper Mendota Gas Fireplace installation and opera-
tion will give you years of safe, trouble free comfort and enjoyment. 
If you have any questions regarding installation or operation of your Mendota Fireplace please contact your local dealer. 

...CAUTION... 

Due to high temperatures, the Fireplace should be located out of traffic and away from furniture and draperies.  Children 
and adults should be alerted to the hazards of high surface temperature and should stay away to avoid burns or clothing 
ignition. Young children should be carefully supervised when they are in the same room as the Mendota Gas Fireplace. 

Clothing or other flammable material should not be placed on or near the Fireplace. 

Any safety screen or guard removed for servicing an appliance must be replaced prior to operating this appliance. 

The  Mendota  Gas  Fireplace is a powerful and efficient heating unit.  It has been designed as a major source of supple-
mental heat. As with any mechanical appliance there can be component shut downs.  It is advisable to have an alternate 
heat supply. 

Installation,  repair  and  any  adjustments  to  logs  or  burner  must  be  done  by  a  qualified  service  person.    The  appliance 
should  be  inspected  before  use  and  at least  annually  by  a  professional  service  person.  More frequent cleaning may be 
required due to excessive lint from carpeting, bedding material, carbon build-up, etc.  It is imperative that control compart-
ments,  burners  and  circulating  air  passageways  of  the  appliance  be  kept  clean.    The  burner  and  pilot  flames  and  logs 
should be visually checked periodically. 

DO NOT use this appliance if any part has been under water or exposed to moisture corrosion.  Immediately call a quali-
fied service technician to inspect the Fireplace and replace any part of the control system and any gas control, which has 
been under water.  DO NOT use this fireplace if the burner does not light immediately.  Turn unit off and call Mendota ap-
proved service person if there is any delay in burner light off. 

It is Johnson Gas Appliance Company's policy that no responsibility is assumed by the Company or by any of its employ-
ees or representatives for any damages caused by an inoperable, inadequate, or unsafe condition which is the result, ei-
ther directly or indirectly, of any improper operation, installation or servicing procedures. 

Building Permit and Installation Inspection Approval Requirements 

All installations of Mendota Fireplaces and Inserts must comply with all the requirements stated in this Installation and Op-
erating Instructions Manual.  The Dealer and/or installer must also obtain all required Building Permits and Inspection Ap-
proval  from  the  local  building  inspection  department  or  the  local  body  having  jurisdiction.    In  order  to  validate  warranty 
coverage, Mendota may require facsimile copies of the Building Permit and Inspection Approval forms.  Failure to provide 
adequate proof that the installation conforms to all local requirements and the requirements stated in the Installation and 
Operating Instructions Manual will void all applicable warranty. 

 

INSTALLER:  THESE INSTRUCTIONS ARE TO REMAIN WITH HOMEOWNER. 

HIGH ALTITUDE INSTALLATION INFORMATION

: Prior to installing at altitudes higher than 7500, please con-

tact the Mendota technical service department for specific venting requirements and venting restrictions. 

 

Summary of Contents for FV41-PF2




























Reviews: