85-03-01107
FV34 DECOR
Page
42
Backup DC Power Inlet Port Installation
INSTALLATION:
It is important that you install the supplied harness, outlet box and cover plate on the left side of this
appliance. The DC Power Inlet harness is 6 feet long, allowing installation of the single gang box up to 5 feet to the
right side
of this appliance. Install the single gang box at a maximum height of 18” to the center of the box or match
the mounting height of this single gang box with the height of other AC outlets that are installed in the same room as
this appliance.
WARNING: DO NOT STAPLE the 6’ DC Power Inlet Harness to the wall studs.
COVER PLATES
: Two cover plates are supplied and are White and Beige in color. If the home décor requires a
different color other than the two supplied colors, obtain one from a local hardware store. Make certain that the cover
you obtain is exactly the same dimensions as the ones supplied with this fireplace.
DECAL INSTALLATION
: A notification decal (label) is supplied with this fireplace that aids in identifying the DC Power
Inlet. Attach this label to cover plate once installation is complete and verified.
INSTRUCT HOMEOWNER
: Demonstrate to the homeowner how to attach the backup DC power pack during power
outages. Instruct homeowner to retain the DC battery pack and the connecting harness in a safe and secure place for
use during power outages
Figure 3-27 Backup DC Power Junction Box Installation
Figure 3-28 BACKUP DC POWER
INLET
Figure 3-29 DC Backup Power Connection
