5
A
B
C
D
E
Loxton 8
660mm
510mm
520mm
150mm
260mm
Loxton 8 Logstore
965mm
Churchill 8
660mm
510mm
650mm
325mm
Churchill 8 Logstore
965mm
D
A
F
B
Hearth
The hearth should be able to accommodate the weight of the stove and its chimney if the chimney is not independently
supported. Churchill, Loxton and Sqabox stoves have been tested and are suitable to be installed on a 12 mm non combustible
plate such as 12 mm glass plates . Installation of all hearths should comply in size and construction so that it is in accordance
with the provisions of the current Building Regulations Approved Document J.
The clearance distances to combustible material beneath, surrounding or on the hearth and walls adjacent to the hearth
should comply with the guidance on the separation of combustible material given in Building Regulations Approved Document
J and also in these stove instructions.
Distance to Combustible materials
Combustible materials should not be located where the heat dissipating through the walls of fireplaces or flues could ignite
it. Therefore when installing the stove in the presence of combustible materials due account must be taken of the guidance
on the separation of combustible material given in Building Regulations Approved Document J and also in these stove
instructions.
The minimum distances to flammable materials are specified on the EN 13240 plate on the back of the stove
Distance to
combustibles rear
Distance to
combustbles sides
Distance to
combustibles sides
Convection models
Suitable for 12mm
non-combustible floor
plate
Loxton 8
N/a
550mm
N/a
YES
Churchill 8
N/a
550mm
400
YES
C
E
A
