Getting Started
Page 14
2
Getting Started
2.1
Configuring the Hardware
Check your hardware requirements before installing the board in a system.
Modifications are difficult or impossible to do when the board is integrated in a system.
2.1.1
Installing an HDD/SSD
Perform the following steps before installing the HDDs/SSDs:
»
Power down your system.
»
Remove the carrier board from the system.
»
If there are already HDDs/SSDs installed:
Installing the first HDD/SSD:
»
Place the first HDD/SSD in the slot close to the front panel on the carrier board and
align it with the guide rails.
»
Align the SATA connector on the HDD/SSD with the SATA connector on the carrier
board.
»
Firmly plug the HDD/SSD into the SATA connector on the carrier board.
MEN offers suitable accessory articles for G503.
See the MEN website for ordering information:
www.men.de/products/g503/#ord
See
