MEN 02G101-00, User Manual

Page: 4 / 36

Technical Data
20G101-00 E2 2015-09-29


Page 4
Technical Data
Supported Port Types

The following configurations are available:
- RJ45: 12x 1 Gbps + 1x 2.5 Gbps (2x 1 Gbps + 1x 2.5 Gbps on front) with "on-the-Fly"
SFP detection support (Model: 02G101-00)
- M12: 12x 1 Gbps CU Ports (3x 1 Gbps M12 on front) (Model: 02G101-01)

Enhancements:
- Gigabit Copper Ethernet line card with 4x 1 Gbps ports, available via RJ45 or M12
connectors at the front panel
- Gigabit Copper Ethernet PHY line card with 4x 1 Gbps ports, available via RJ45 or
M12 connectors at the front panel
- Gigabit Ethernet SFP PHY line card with 4x 1 Gbps ports, available via SFP cages at
the front panel
- Supports up to 6 line cards, depending on configuration, with optional PoE
Tested SFP Types

CISCO GLC-SX-MM, 1 Gbps BASE-SX, 220/500 m, 0 to +70×C

AVAGO ABR-5710 ALZ, 1 Gbps BASE-SX, 250/550 m, -40 to +85×C

Finisar FTLF8519P3BTL, 1 Gbps BASE-SX, 300/500 m, -40 to +85×C

Finisar FTLF1318P3BTL, 1 Gbps BASE-LH, 10 km, -40 to +85×C

Finisar FTLF1518P1BTL, 1 Gbps BASE-ZX, 80 km, -40 to +85×C

AVAGO ABR-57R5APZ, 4.25 Gbps BASE-SX, 300 m @ 2.125 Gbps, -10 to +85×C
Switching Matrix

Max. Throughput: 29 Gbps / 40 Mpps@64 Bytes per packet

Max. Mac Address Table Size: 8192

Switching Algorithm. TCAM
General Network Support

IPv4 and IPv6 Forwarding and Management

IPv6 Ready Logo Phase 2
Ports and Port Control

Energy Efficient Ethernet (IEEE 802.3az)

ETH Signal Equalization and Power Control

Port state (admin), speed, duplex mode and flow control

Port frame size (Jumbo Frames: 9216 Bytes/Packet max)

Port status (link monitoring) and statistics (MIB counters)

Port VeriPHY (cable diagnostics), ActiPHY? and PerfectReach

Inband management (VRAP)
User Configuration Interfaces

http/HTTPs, Telnet, SSHv2, Console (USB)