Initial Configuration
20G101-00 E2
2015-09-29
Page 20
Figure 4.
Command line interface
2.2
Quick Start Guide
The quick start guide is intended to get the user through the initial start-up of the switch
firmware and includes:
Login and reset the configuration to factory default
Setting a device hostname and admin user password
Setting the VLAN 1 IP address
Verifying the connectivity using 'ping'
Displaying the current configuration and saving to FLASH storage
The G101 switch must powered on have a functional computer connection using the
serial console port on the device (115200 baud, no parity, 8 data bits, 1 stop bit, no flow
control).
The computer must be running a terminal emulator such as TeraTerm or
PuTTY on Windows, or Minicom on Linux.
