4
Unpacking and Assembling Your Memphis Wood Fired Convection Grill.
Please note that during shipping some movement may have taken place, so a complete visual inspection
is required.
Be sure to inspect entire grill after removing the protective shipping carton. Report any
damage to your local dealer immediately.
Shipping damage is not covered under warranty. Some surfaces
may be sharp so wear gloves when assembling. Do not plug in the grill until it's fully assembled, the
plastic protective film is removed from all stainless steel surfaces, and you're ready to cook. See: “start up
procedure” for more details.
Your carton will contain the following:
•
1- grill head with ITC mounted in front
•
2- large cooking grates
•
1- Integrated heat deflector / flavorizer
•
4- grill legs
•
1- base bottom
•
1- hardware bag with owners manual
•
Note: optional shelves and hardware are packaged in a separate box.
Tools Required
•
Two 3/8” open end wrenches for leg and base assembly
•
Phillips Head screw driver
•
Rubber mallet to install caster sockets
Unpack and Identify Primary Components and Hardware (see supporting diagrams)
•
16 -
¼
-20 X 2 1/4” bolts
•
16 –
¼
-20 serrated flange nuts
•
4- caster sockets
•
4- push in casters
Optional Shelf Kit Includes:
•
2 – Shelf tops
•
4 – Shelf support brackets
•
2 - Shelf bracket right
•
2 - Shelf bracket left
•
12 - #10 self tapping screws
Procedure for Assembly – See Diagrams on following pages. Note: Optional Shelf Kit
installation is also contained in this section.
