Memphis Pro Built-in Wook Fired, Owner'S Manual And User'S Manual

Page: 4 / 34

Memphis Pro Built-In
4
Unpacking and Assembling Your Memphis Wood Fired Convection Grill.
Read all Safety Information Prior to Operating Grill!
*Grill requires (2) two people for safe assembly*
Please note that during shipping some movement may have taken place, so a complete visual inspection
is required. Be sure to inspect entire grill after removing the protective shipping carton. Report any
damage to your local dealer immediately. Shipping damage is not covered under warranty. Some surfaces
may be sharp so wear gloves when assembling. Do not plug in the grill until it's fully assembled, the
plastic protective film is removed from all stainless steel surfaces, and you're ready to cook. See: “start up
procedure” for more details.
Your carton will contain the following:
1- pre-assembled grill head assembly
2- large cooking grates
1- small cooking / warming grate
1- Integrated flavorizer / flame deflector
1- hardware bag with owner’s manual
1- right, left, rear & front mounting bracket (1 each)
1- controller assembly
Tools Required
3/8” open end wrench or socket
Phillips head screw driver
Unpack and Identify Primary Components and Hardware (see supporting diagram page 33)
4- ¼-20 X1/2
” bolts
4- 5/8
” diameter washers
6- #10 self-tapping screws
Procedure for Assembly – See Diagrams on pages 26 - 33.
CAUTION: Remove ALL protective plastic film from stainless steel surfaces before starting
the grill. It will melt and adhere to the stainless steel!