17
MEMPHIS WI-FI SETUP GUIDE
ON YOUR GRILL CONTROLLER:
1. Navigate to the Settings Screen on the display.
2. Select “Connect to WiFi” to navigate to the
Connection Screen.
3. Press the blue “Connect WiFi” button to broadcast
the BLE signal.
4. Follow the steps below on your Memphis 3 App.
ON YOUR PHONE OR TABLET: (In Memphis 3 App)
5. Log into Memphis 3 App using your account email and
password.
6. If no grill is connected, the BLE provisioning process will begin
automatically. Otherwise, navigate to the Setting Screen and
select “Add Grill”.
7. Select your grill from the provisioning screen.
8. Select the 2.4GHz network you would like to connect to your
Memphis grill, enter the network password, and press
“Provision”.
9. If successful, the controller will display “Connection
Successful” and show the WiFi signal strength in the top right
corner.
*Note: If a red X is displayed on the controller instead of the signal
strength the connection was unsuccessful. Attempt to provision the
controller again, otherwise contact Memphis Technical Support.
GRILL NETWORK INFORMATION
Navigating back to the “Connect to Wifi”
Screen displays the Network information
as well the MAC Address and IP Address
of your Memphis Grill.
