Rear view
7. Digital Audio Output Connector
If your sound card has a digital audio IEC98 format
connector, you can connect it to this digital audio
output connector with a 2-pin audio cable.
8. Analogue Audio Output Connector
This connector allows you to connect the
drive to your sound card with a 4-pin audio cable.
1: Left
2: GND
3: GND
4: Right
9. Jumperblock
These jumpers are used to select Master/Slave mode and Cable Select
(See Appendix for more information).
10. IDE Connector
40 pin IDE flatcable connector (See Appendix for more information).
11. Host DC Power Connector
1: +12V
2: GND
3: GND
4: +5V
Attention
Any other pins not mentioned above which appear at the rear of the drive are for maintenance purposes only and
should be utilized only by authorized personnel. Any unauthorized use of such pins may result in the drive not
operating correctly and will void the warranty.
Additional and updated
information can be found
directly on our fully
interactive website
www.memorex.com
8
ThirtyTwoMAXX
Controls
Next
Back
Other options
US
7 8
9
10
11
Rear view
1
2
3
4
1
2
3
4
