DISASSEMBLY INSTRUCTIONS
B2-1
2. REMOVAL OF VCR DECK PARTS
2-1: TOP BRACKET (Refer to Fig. 2-1)
Extend the 2 supports
1
.
Slide the 2 supports
2
and remove the Top Bracket.
1.
2.
2-2: CASSETTE HOLDER ASS'Y (Refer to Fig. 2-2)
Move the Cassette Holder Ass'y to the front side.
Push the Locker R to remove the Cassette Side R.
Remove the Cassette Side L.
1.
2.
3.
Fig. 2-1
2
2
Main Chassis
Main Chassis
Top Bracket
Top Bracket
Main Chassis
Main Chassis
Cassette Side L
Cassette Side R
Locker R
Fig. 2-2
Link Unit
2-3: LINK UNIT (Refer to Fig. 2-3)
Set the Link Unit to the Eject position.
Unlock the support
1
.
Remove the (A) side of the Link Unit first, then remove
the (B) side.
1.
2.
3.
Fig. 2-3
(A)
Link Unit
Main Chassis
1
Link Unit
(B)
Main Chassis
1
1
NOTE
1. After installation of the Top Bracket, bend the support
1
so that the Top Bracket is fixed.
2-4: LINK LEVER/FLAP LEVER (Refer to Fig. 2-4)
Extend the support
1
.
Remove the Link Lever.
Remove the Flap Lever.
1.
2.
3.
Fig. 2-4
Link Lever
Flap Lever
1
2-5: LOADING MOTOR/WORM (Refer to Fig. 2-5-A)
Remove the screw
1
.
Remove the Loading Motor.
Remove the Worm.
1.
2.
3.
Fig. 2-5-A
• Screw Torque: 3
±
0.5kgf•cm
Loading Motor
1
Main Chassis
Worm
NOTE
1.
2.
3.
In case of the Worm installation, check if the value of
the Fig. 2-5-B is correct.
In case of the Loading Motor installation, hook the wire
on the Cassette Opener as shown Fig. 2-5-C.
When installing the wires between Capstan DD Unit
and Loading Motor, connect them correctly as shown
Fig. 2-5-D.
Fig. 2-5-B
19.2
±
0.1mm
Safety surface for pressing
of the insert.
Summary of Contents for MVDT2002
Page 90: ...M5T4 09Q SPEC NO O R NO W575047...
Page 106: ...M5T4 10J SPEC NO O R NO W585048...
Page 200: ...M5V4 04J SPEC NO O R NO W625039...