Memorex MVDT2002, Service Manual

Page: 125 / 202

DISASSEMBLY INSTRUCTIONS
B2-1
2. REMOVAL OF VCR DECK PARTS
2-1: TOP BRACKET (Refer to Fig. 2-1)
Extend the 2 supports (1).
Slide the 2 supports (2) and remove the Top Bracket. 1.
2.
2-2: CASSETTE HOLDER ASS'Y (Refer to Fig. 2-2)
Move the Cassette Holder Ass'y to the front side.
Push the Locker R to remove the Cassette Side R.
Remove the Cassette Side L. 1.
2.
3.
Fig. 2-1
(2)
(2)
Main Chassis
Main Chassis
Top Bracket
Top Bracket
Main Chassis
Main Chassis
Cassette Side L
Cassette Side R
Locker R
Fig. 2-2
Link Unit
2-3: LINK UNIT (Refer to Fig. 2-3)
Set the Link Unit to the Eject position.
Unlock the support (1).
Remove the (A) side of the Link Unit first, then remove
the (B) side. 1.
2.
3.
Fig. 2-3
(A)
Link Unit
Main Chassis
(1)
Link Unit
(B)
Main Chassis
(1)
(1)
NOTE
1. After installation of the Top Bracket, bend the support
(1) so that the Top Bracket is fixed.
2-4: LINK LEVER/FLAP LEVER (Refer to Fig. 2-4)
Extend the support (1).
Remove the Link Lever.
Remove the Flap Lever. 1.
2.
3.
Fig. 2-4
Link Lever
Flap Lever
(1)
2-5: LOADING MOTOR/WORM (Refer to Fig. 2-5-A)
Remove the screw (1).
Remove the Loading Motor.
Remove the Worm. 1.
2.
3.
Fig. 2-5-A
• Screw Torque: 3 ± 0.5kgf•cm
Loading Motor
(1)
Main Chassis
Worm
NOTE
1.
2.
3.
In case of the Worm installation, check if the value of
the Fig. 2-5-B is correct.
In case of the Loading Motor installation, hook the wire
on the Cassette Opener as shown Fig. 2-5-C.
When installing the wires between Capstan DD Unit
and Loading Motor, connect them correctly as shown
Fig. 2-5-D.
Fig. 2-5-B
19.2 ± 0.1mm
Safety surface for pressing
of the insert.