background image

 

4

Statement

 

This is product grade A, it maybe cause radio interference during work ambierce? And user 

probably will have to take some reasonable anti-interference measurements under this condtion.   

1

 

.Before connecting the power supply , you should confirm that the local ammeter meets the 

requirements of monitor

 

2

 

.In order to prevent electricity shock, do not touch the inner of the monitor .Only the 

professional technical personals can open the cover of the monitor

 

3

 

  Please do not use the monitor if the wire has been damaged. Do not put any object on the 

wire, and keep the power wire away from the place where people often pass 

4

 

.When connecting the plug of wire, do hold the plug with your hand and do not pull the wire 

directly

 

5

 

.The holes on the cover are used to ventilate ,so in order to prevent the inner overheats, do 

not jam these holes ,In addition do not use the monitor on bed ,sofa blanked or other soft 

objects, so that the bottom holes will not be jammed and take the bad effect. If you put the 

monitor in the bookshelf or other closed place, please enforce the ventilation

 

6

 

.Never insert metal object into the ventilation holes in order to prevent electricity shock

 

7

 

.Put the monitor at dry and no dust place: do not put it in damp basement or hall where there 

is much dust, etc. 

8

 

.Keep away from rain. Do not use the monitor in the places near water (i.e. ., kitchen, 

swimming poor ,etc), If the monitor is dampened carelessly ,you should turn off the power 

supply and contact with supplier .If necessary indeed, you can wipe the monitor with humid 

wiping cloth ,which has been wrapping out, with the precondition that you have turned off 

the power supply. 

9

 

.Monitor should be putted on the solid flat, and being held and putted gently. because the 

monitor is made of glass, it can be damaged if you hit it with sticks or clap it seriously 

10

If the monitor cannot work normally, especially there is abnormal sound or burnt flavor in side 

it ,you should turn off the power supply immediately and contact with the supplier

 

11

High temperature can cause trouble, so do not use the monitor in the place there is sunshine 

The monitor should be putted in the place being distant to the heater, the stove fireplace or 

other heat source. 

12

.Turn off the power supply if you will not use the monitor for long. 

13

.pull out the power wire before removing the monitor

 

Summary of Contents for MM1720












Reviews: