background image

- 7 -

INTRO

1. Press the MODE button 3 times to enter the intro mode, “INTRO” appears on the display.

2. Press the PLAY/PAUSE button, CD will player the first 10 seconds of each track on the CD.

SPECIAL FUNCTIONS

Dynamic Bass Boost

Set the BASS BOOST switch to “ON” position to enjoy a more powerful bass sound.
Note : Since Bass Boost performance will change depending on the volume level, sound maybe

distorted due to high volume is set. Lower the volume level until the sound quality is improved.

Hold function

The HOLD switch disables the buttons from operating to prevent play from starting or stopping due

to accidental operation. For normal use, leave the switch in the off position.

To prevent battery drain :

Set the HOLD switch to the on position when carrying the unit in a bag. The PLAY/PAUSE button will

not function even if the button is pressed accidentally.

To prevent play from being interrupted :

Set the HOLD switch to the on position after starting play. “HOLD” appears.

If the operating buttons do not function when pressed.....

1. Check whether the HOLD switch is on or not.

2. Remove the batteries and/or disconnect the AC adaptor from the unit. Wait a few seconds,

then reinstall the batteries or reconnect the AC adaptor.

3. If the buttons still do not function, insert new batteries.

Anti-shock Function

If in use, the player is likely to receive shocks or vibrations (i.e. whilst walking or in a moving

vehicle),press the ANTI-SHOCK button to provide uninterrupted playback.

When the button is pressed, the display will show ( 

  ) and the function is initialised.

When (  

  ) appears on the display, the data buffer is full.

Should be player receive continuously, the sound can mute for a very short while and will resume

once the player has stabilised from the shock.

Note :

When using the Anti-shock function, the disc will rotate faster then normal playback and memory

is active. Only use the ANTI-SHOCK function when necessary to preserve the battery life.

The Anti-shock function will not correct the errors arising from the use of defective scratched or

dirty discs.

Summary of Contents for MD6440-01CP















Reviews: