background image

8

Press the Stop/Eject button and
insert a microcassette tape with
the side to be played facing you
and the exposed tape facing the
right. Close the Cassette
Compartment.

1

For Voice Activated Recording,
slide the VAS ON/OFF switch 

to the ON position and press the
REC button 

❷ 

(the PLAY button

will automatically depress).

1

2

2

VOICE ACTIVATED (VAS) RECORDING

Speak into the built-in
microphone or insert a
microphone into the MIC jack and
speak into it in a normal tone of
voice. Adjust the VOLUME/VAC
Mic Sensitivity control until your
voice activates the recorder
(REC/BATT indicator will light).

3

NOTES:

The first few sounds activate
the recorder and may not be
recorded. 

• A variation in voice level during

recording will not stop the unit,
2 seconds of silence is
required to stop the recording.

• For constant recording, see

previous page.

• When recording, the VOLUME/

VAC Mic Sensitivity control
adjusts the microphone
sensitivity. At 10, a soft sound
will activate the recorder. At 0,
a louder sound is required.

OPERATION

Voice activated recording will allow dictation only when you
speak. When the unit detects a pause of a few seconds, it will
temporarily stop recording until it detects sound again.

MB2186 O/M.QXD  8/12/02  11:22 AM  Page 8

Summary of Contents for MB2186














Reviews: